Material and Color: This item features our 801-Black Plush Cut Pile carpet. Please note that while the main product image may show a different color, the swatch image accurately reflects the correct color.Because we offer a wide variety of colors, please double-check your selection before ordering. Please request free samples if you are unsure of the color
Vehicle Compatibility: This carpet will fit just like original carpet when installed correctly. This carpet is formed to fit a 1976-1981 Pontiac Trans Am Automatic With Console
Installation Notes: This automotive carpet is custom-formed but may require trimming and cutting holes to install. Please review the complete instructions provided in the description before starting. Unless specified otherwise, the jute insulation padding is heat-bonded to the underside, and the protective heel pad is pre-welded into its factory-correct position.
Custom Manufacturing: This carpet features a standard, flexible polyethylene backing. If you prefer an upgrade to premium Massbacking, please contact us before ordering. Using a form that was cast directly from the original floor pan, each carpet is precision heat and pressure formed. When properly installed following the provided instructions, it will fit the contours of your original floor pan.
Carpet Quality: All automotive carpets are Made in USA with Top Quality auto carpet materials. This carpet has a 1 year manufacturer warranty.
This item will be made in color: 801 - Black Plush Cut Pile
This carpet will fit 1976-1981 Pontiac Trans Am, Automatic With Console. This item is made with the console area cut out.
Carpet will be made with standard flexible polyethylene backing. Contact us to upgrade to Massbacking
Unless specified, the jute padding will be attached in the foot area of the carpet
Installation may require trimming around the edges and the holes may need to be cut
There is a large variety of colors available. Please request free samples if you are unsure of the color
PLEASE READ - Instructions may vary for multi-piece sets
Unbox: Remove carpet from the box. Lay it flat, pop the formed contours back into place, and allow it to sit for a few hours. Verify the material and color are correct
Compare: Lay your old carpet next to the new one to verify
Template: You may use the old carpet as a template for console and bolt hole cuts
Alignment: Fold the new carpet in half from front to back. Place it in the vehicle, aligning the contours or another fixed factory starting points
Roll and Cut: Roll the carpet forward, making cuts for brackets, shifters, and vents while ensuring the carpet remains aligned with your starting point
Firewall Fit: If needed, make a center cut at the firewall to allow the carpet to slide underneath the dashboard
Work Outward: Repeat this alignment process, working your way from the center out toward the edges
Final Trim: Once you are satisfied with the dry fit, perform your final trimming along the outer edges, seat belt mounts, and remaining holes
Pro Tip: If you choose to use an adhesive, apply a light brush-on or spray adhesive after a dry fit has been done
What's in the box
Carpet
Install Instructions
Recommended items
Purple 3” Fuzzy Dice
Purple 3” Fuzzy Dice
$6.00
Die Stamped Steel Floor Pan
Floor Pan
$180.00
Vintage Classic Car Part 1958 Chevy Impala Plastic Floor Foot Rest
Vintage Classic Car Part 1958 Chevy Impala Plastic Floor Foot Rest
$39.00
Chevrolet Vintage Auto Car Parts Steering Part Classic Knob Rare
Chevrolet Vintage Auto Car Parts Steering Part Classic Knob Rare